The incubator is widely used. For scientific researchers, it is relatively easy to use, but it is still used for the first time. You may understand the entire workflow and usage methods, but may ignore some details and cause some minor troubles. Pay attention to the details of use. Avoid some small problems that will affect the progress of the experiment. Shanghai Aozhen’s incubators will be equipped with instructions for use, and video guidance is also supported. Some minor problems are often not caused by the failure of the machine itself. It seems normal, but it is essential knowledge. Before, we also shared a lot of incubator usage specifications, self-checks for problems, etc. You can go to our technical section to check if necessary. Today’s sharing is relatively simple and suitable for first-time users.
1. The box must be placed in a firm and stable place to ensure safety. If there are some minor problems that you can handle, remember not to open the left door of the box when the power is on, because there are electrical wiring inside to prevent electric shock.
2. When cleaning the incubator, please use alcohol to clean up, do not use wet towels, it will leave water stains after wiping, please do not clean up when power is on
2. In the experiment, you need to open the outer door to observe the sample. Do not splash water on the glass to prevent the glass from bursting due to sudden cooling.
3. Although our incubators now have universal wheels for easy movement, make sure that the power supply is disconnected before moving, and there are no test samples in the working room to avoid electric shock and damage to the experimental vessels.
4. Try to avoid putting flammable products in the box for testing. If you must conduct an experiment, you need to measure the ignition point of the sample before the test and control the temperature to avoid potential safety hazards.
5. It is a good habit to clean the boxes frequently. Regardless of whether they are used frequently or left for a long time, they must be cleaned regularly to avoid minor malfunctions such as malfunctions caused by hygiene problems.
6. When the incubator breaks down, you should contact our technical or after-sales service immediately, please do not disassemble and check privately
Well, today we will share these, if you need drying oven, incubator, muffle furnace, water bath, high and low temperature box, etc., you can contact us Shanghai Augem. The models are complete and support any non-standard customization. With many years of experience and perfect after-sales service, you don’t have to worry about buying bad products, you don’t have to worry about malfunctions or if you need to modify the after-sales service. Technical service in one step